1532 SE Village Green Drive
Port St. Lucie, FL 34952
772-398-0288 Fax 772-398-0252
email: gggunsmithing@aol.com
1532 SE Village Green Drive
Port St. Lucie, FL 34952
772-398-0288 Fax 772-398-0252
email: gggunsmithing@aol.com
| GUN CLEANING | |
| Light | Min. $20.00 |
| Heavy | Min. $35.00 |
| Restoration | POR |
| GUN EVALUATION | |
| Look at | $10.00 |
| Price & information | $10 per $100 Value |
| STOCK WORK | |
| Minimum refinishing | $95.00 |
| Master refinishing | POR |
| Recut checkering-simple pattern | $90.00 |
| Recut checkering-master pattern | $190.00 |
| Wood engraving / inlay | POR |
| Original checkering | POR |
| Install recoil pad | $40.00 - $60.00 |
| Inletting | POR |
| ACTION BEDDING | |
| (Steel) | $95.00 |
| Install pillars | $55.00 |
| SIGHT WORK | |
| Test fire | $10.00 |
| Shoot in gun (ammo extra) | $45.00 |
| Scope mtg w/gun drilled & tapped | $30.00 |
| Laser sighting w/corrections | $30.00 |
| Drill & tap per hole | $30.00 |
| BoMar low mount milling | $90.00 |
| Cut Dovetail (minimum) | $45.00 |
| Install: | |
| sweat on | $30.00 |
| screw on or push in | $30.00 |
| Night sights installed | Min. $30.00 |
| Insert in pistol sight | $45.00 |
| *No parts included | |
| BARREL, ACTION & RIFLE WORK | |
| Custom rifles | POR |
| Custom ammo | POR |
| Check head space | $15.00 |
| Chamber & barrel cast | $25.00 |
| Remove: | |
| fired case | $30.00 |
| live round | $50.00 |
| Cut and crown barrel | $45.00 |
| Cut & weld new bolt handle | $85.00 |
| Heat, bend & polish bolt handle | $60.00 |
| LARGE INVENTORY OF GUN PARTS & ACCESSORIES | |
| Chamber & fit bbl to action | $150.00 |
| Lap bolt lugs & polish | $65.00 |
| Triggers: | |
| drop in | $35.00 |
| double set | $50.00 - $100.00 |
| match | POR |
| Jeweling | |
| Hammer & trigger | $60.00 |
| Rifle bolts | $80.00 |
| Install Timney: | |
| Remington | $45.00 |
| Winchester | $65.00 |
| Savage | $55.00 |
| Ruger | $85.00 |
| Install safety: | |
| Buehler type | $55.00 |
| Winchester type | $95.00 |
| *No parts included. | |
| SHOTGUN WORK | |
| Install: | |
| Bead existing hole | $15.00 |
| Bead new hole | $35.00 |
| Resolder rib | POR |
| Raising dent (each) | POR |
| Leveling bulge (each) | POR |
| Polish chamber & bore | Min. $45.00 |
| Cut & crown | $45.00 |
| Cut & crown double | $75.00 |
| *No parts included | |
| COMPETITION/SPORT SHOTGUN | |
| Price On Request for: Stock Fit - Adjust Combs - Adjust Recoil Mercury Inserts - Recoil Pads |
|
| SEMI-AUTOMATIC HANDGUN WORK | |
| Lower rails (peening or swedge) | $60.00 |
| Lap rails to slide | $45.00 |
| Tighten slide | $45.00 |
| Fit barrel | $65.00 |
| Install bushing (custom) | $55.00 |
| Bevel magazine well | $55.00 |
| Open & flare ejection port | $75.00 |
| Throat, polish bble & feed ramp | $65.00 |
| Sear, hammer mating | $70.00 |
| Fit custom hammer (no mating) | $25.00 |
| Install non-standard grip safety | $85.00 |
| Install oversized hammer & sear pins | $30.00 |
| Recut crown | $25.00 |
| Restake plunger tube | $25.00 |
| Stake NEW front sight | $40.00 |
| Adjust & fit extractor | $25.00 |
| Fit ambi-safety | $50.00 |
| Fit thumb safety | $45.00 |
| *No parts included | |
| REVOLVER HANDGUN WORK | |
| Action job (clean & smooth) | $60.00 |
| Install: | |
| D/A Cylinder | $65.00 |
| S/A Cylinder | $55.00 |
| Rebarrel with factory new | $65.00 |
| Straighten crane | $35.00 |
| Crane lock | $30.00 |
| Modify hammer spurs | $45.00 |
| Set barrel back | $75.00 |
| Head spacing (inc. endshakes) | $70.00 |
| Yoke endshake | $35.00 |
| Cylinder endshake | $35.00 |
| Timing | $65.00 |
| Recut crown | $25.00 |
| *No parts included | |
| MINIMUM SHOP CHARGE: | $45.00 |
| SHOP LABOR RATE: | $60.00/hr. for non-listed work |
| WHOLESALE PRICES available - submit FFL & Tax Cert.
TERMS: Net cash/check. Credit cards & ATM Cards are accepted. Any gun not picked up within 30 days shall become the property of GREY GOOSE GUNSMITHING INC. and disposed of to pay for services. |
|
